Farr 30/30 ®
For warranted longer-lasting filters, the smart money is on Farr 30/30® filters. The Farr 30/30 has an Energy Cost Index (ECI) of five stars, the highest performance rating available.
Our exclusive media is bonded to a welded wire grid and then formed into a radial pleat, allowing full use of the media. This configuration allows the 30/30 filter to hold more dirt and last longer. The 30/30 frame is made of water-resistant beverage board instead of recycled cardboard, so the 30/30 will stand up to the worst conditions an HVAC system will present. No filter distortion or blowouts.
Aeropleat® III
The Aeropleat III may be the model of choice where air filters are changed on a PM (time) schedule. Consult your local Camfil distributor for guidance in this area. The Camfil Aeropleat III is designed for applications requiring competitive efficiency and dust holding capacity.
As a stand-alone filter, the Camfil Aeropleat addresses today's indoor air quality concerns. Applications include commercial buildings, educational facilities, medical facilities, industrial manufacturing, and any other locations where a competitive quality filter is required. As a prefilter, the Camfil Farr Aeropleat offers protection and extended life for higher efficiency final filters.
Aeropleat® IV
The Camfil Aeropleat IV extended surface pleated filter offers more media for high dirt-loading applications. The Aeropleat IV has a MERV 8 when evaluated per ASHRAE Standard 52.2
As a stand-alone filter, the Camfil Aeropleat addresses today's indoor air quality concerns. Applications include commercial buildings, educational facilities, medical facilities, industrial manufacturing, and any other locations where a competitive quality filter is required. As a prefilter, the Camfil Farr Aeropleat offers protection and extended life for higher efficiency final filters.
AP-Eleven
The Camfil AP-Eleven extended surface pleated filter offers filtration for application in units that have 1", 2" or 4" deep tracks for filter installation. The AP-Eleven is a MERV 11 filter when evaluated per ASHRAE Standard 52.2-1999.Using the AP-Eleven may reduce the size of the HVAC system, saving valuable mechanical area floor space. An Energy Cost Index (ECI) of five stars is the highest performance rating available.
Standard pleated filters remove nuisance dusts, lint and contaminants associated with staining and are primarily designed to protect equipment and act as prefilters. As a stand alone filter, the AP-Eleven will perform these tasks and also remove sub-micron particle, defined as lung-damaging by cognizant authorities.
AP-Thirteen
The Camfil AP-Thirteen extended surface pleated filter offers filtration for applications that have 2" or 4" deep filter tracks. The AP-Thirteen is a MERV 13 filter when evaluated per ASHRAE Standard 52.2 and meets the requirements for minimum filtration efficiency, as published in LEED manuals for new or existing buildings. The AP-Thirteen may reduce the size of the HVAC system, saving valuable mechanical area floor space. It also simplifies the upgrading of in-place systems, allowing existing units to meet LEED requirements without major equipment modification.